Viewing The Abnormal <!> Display - Sony SRW-9000 Operation Manual

<VF DISPLAY> page
Item Setting
FPS Set to ON to obtain the frame rate
indication 1.
EX Set to ON to display the lens extender
indication 2.
ZOOM Set to ON to display the zoom position
indication 6.
FOCUS Set to ON to display the focus position
indication 5.
ND Set to ON to display the optical filter
indications 9.
CC
5600K Set to ON to display the 5600
indication 8.
IRIS Set to ON to display the F value
indication qf.
WHITE Set to ON to display the white balance
memory indication 7.
GAIN Set to ON to display the gain value
indication q;.
SHUTT Set to ON to display the shutter
indication qa.
UNIT Select the unit for the shutter
indication.
deg: Shutter angle (Default)
sec: Shutter speed (sec)
BATT Set to ON to display the battery
indication 4.
REC Set to ON to display the recording
mode indication 3.
TAPE Set to ON to display the tape
remaining indication qd.
TC Set to ON to display the timecode
indication qj.
AUDIO Set to ON to display the auto level
meters qs.
Item Setting
MESSAG Select the type of messages to be
displayed in the message area qh.
ALL: Display all messages
AT: Display auto setup information
and higher
WRN: Display warning messages and
higher
OFF: Display warning messages of
the highest level only
Viewing the ABNORMAL <!>
Display
An ABNORMAL< ! > screen like the one shown
below appears if you press the CANCEL/
STATUS button when the basic status indications
are displayed in the viewfinder.
This screen allows you to check for items that are
set to non-standard settings.
You can select the items to display and define
non-standard settings on the <'!' IND> page of
the Camera >USER (OPERATION) menu.
Setting the ABNORMAL<!> indications
<'!' IND> page
For each item, select ON in the [IND] column if
you want that item to appear in the
ABNORMAL<'!'> screen.
Specify the standard setting in the [NORMAL]
column.
Viewing Settings and Indications in the Viewfinder 61