Table of Contents
Advertisement
Name
PAUSE button and
indicator
a) E-E mode: A state in which E-E (electric to electric) signals can be monitored. Commonly used to monitor the camera
picture or the input signal before either is recorded.
b) E-E signal: A signal which passes solely through internal circuitry, and not through pathways in which magnetic
conversion takes place, such as magnetic heads and tapes.
Pressed alone
Pauses tape transport. (The
indicator flashes during pause.) To
resume tape transport, press the
button again.
Pressed with FUNC button
Cues up a time data position specified with
FUNC+REC buttons or SYSTEM Setup
>EDIT >IN POINT in the VTR menu and
stops. The specified time data (Mark In data)
is displayed in the format "IN: xx:xx:xx:xx"
in the time data field of the display.
Turning the ADJUST knob during the paused
state performs jog search, and a shuttle still is
displayed whenever you stop turning. The
image and the TCR value may not always
match. Press the PAUSE button again to
return to the paused state.
Note
The Mark In data is only temporarily
memorized in the unit's internal memory. It is
Locations and Functions of Parts
25
Advertisement
Table of Contents
