Selecting The Video Formats - Sony SRW-9000PL Operation Manual

Figure Setting item Setting value
number
Starting FPS
2
value
Ending FPS
3
value
Ramp time
4
(seconds)
Video level
5
compensation
mode (see
page 46)
Ramp mode
6
(FPS ramp
curve)
To change a setting value: Move the cursor to
the left of the item to set, and then turn the
MENU SEL/ENTER dial.
To switch 2 (starting FPS value) and 3
(ending FPS value): Press assignable
button 2.
To execute the ramp function: Press assignable
button 3.
The FPS (number of frames shot) changes
according to the settings described above.
During execution, "*" appears to the right of
the current FPS value (1 in the figure).
1
2 3
The "*" indication disappears when
execution end, and the 2 (starting FPS
value) and 3 (ending FPS value) values are
switched.
Note
The following limitations apply during execution of the
ramp function.
48 Basic Settings with the Subdisplay
S23.98PsF/S24PsF: 1 to
24
S25PsF: 1 to 25
S29.97PsF/S30PsF: 1 to
30
S50PsF: 1 to 50
S59.94PsF/S60PsF: 1 to
50
0 to 30
A (Angle): Angle
compensation mode
G (Gain): Gain
compensation mode
–: No compensation
L (Linear): Linear mode
E (Exponential):
Exponential mode
–: Ramp off
Note
The ramp function is not
executed when "–" is
selected. (Assignable
button 3 does not work.)
• The values of the setting items (2 to 6) cannot be
changed.
• FPS cannot be controlled from this unit or a remote
control unit.
• The subdisplay page cannot be switched to another
page.
To set up and execute the ramp function
from a menu
You can use the <RAMP> page of the PAINT
menu (see page 149) to operate in the same way
as the subdisplay ramp settings page.
When you execute the ramp function, the
subdisplay changes automatically to the ramp
settings page.

Selecting the Video Formats

You can select the video format from among the
eight registered formats.
When the unit is shipped from the factory, the
following eight formats are registered under
numbers 1 to 8.
No. Registered
format
1 (default) 23.98P 4:2:2
2 24P 4:2:2
3 25P 4:2:2
4 29.97P 4:2:2
5 50P 4:2:2
6 50I 4:2:2
7 59.94I 4:2:2
8 NO ASSIGN
Video format selection page
The first line indicates the currently selected
format.
When you switch to data modification mode, an
alternative format appears on the second line.
This allows you to select the desired format from
among the registered formats.
Indication on the
subdisplay
_23.98P 422
_24P 422
_25P 422
_29.97P 422
_50P 422
_50I 422
_59.94I 422