Viewing The Abnormal <!> Display - Sony F35 Operation Manual

The set NEAR END and END values can be checked on
the <BATTERY ALARM> page of the USER
(OPERATION) menu.
c White balance memory
Displays the currently selected white balance memory.
W:A: Memory A
W:B: Memory B
W:P: Preset memory
The setting is fixed at W:P in Cine mode.
In Custom mode, you can change the setting using the
subdisplay or from a remote control unit.
d Color temperature filter mode
Indicates the condition of the electrical filter.
In Cine mode, "5600" is displayed when the daylight filter
is selected. When the tungsten filter is selected, this
column becomes blank.
In Custom mode, "5600" is displayed when 5600K is set
to ON.
e Optical filters
Displays the types of filters currently selected.
f Gain value
Displays the video gain value (dB) of the video amplifier.
g Shutter
The shutter setting is displayed with the shutter angle or
frequency. For a shutter angle,
The type of the display, angle (deg) or speed (sec), can also
be switched on the <VF DISPLAY> page of the USER
(OPERATION) menu (default: deg).
h Tape remaining
The remaining time of the tape of the recorder docked on
the camera is roughly indicated in minutes.
i Recording mode
"REC" is displayed when the recorder docked on the
camera is in REC mode.
j Self-diagnosis information
"CAM?" is displayed if an error is generated, e.g., on an
internal board, and an error message appears in the
message area.
This indication cannot be set to OFF.
For the error messages, see "Warning/Error Messages"
(page 114).
k Message area
Displays the status of auto setup, error messages, etc.
l Time code area
Displays the same time codes as those on the subdisplay.
For details, see "3-2-8 Confirmation of the Time Code and
Tape Remaining" (page 38).
48
Viewing and Setting the Viewfinder Displays
is displayed at the left.
Setting the basic status indications
The conditions for displaying the basic status indications
can be set on the <VF DISPLAY> page of the USER
(OPERATION) menu.
<VF DISPLAY> page
< V F D I S P L A Y >
F P S : B O N
N D : O N
5 6 0 0 K : O N
W H I T E : O F F
Item Setting
FPS Set to ON to obtain the frame rate indication
1.
ND Set to ON to obtain the optical filter
indications 5.
5600K Set to ON to obtain the 5600 indication 4.
WHITE Set to ON to obtain the white balance
memory indication 3.
GAIN Set to ON to obtain the gain value indication
6.
SHUTT Set to ON to obtain the shutter indication 7.
UNIT Select the unit for the shutter indication.
deg: Shutter angle (Default)
sec: Shutter speed
BATT12 Set to ON to obtain the battery indications 2.
BATT24
REC Set to ON to obtain the recording mode
indication 9.
TAPE Set to ON to obtain the tape remaining
indication 8.
TC Set to ON to obtain the time code indication
qs.
MESSAG Select the type of messages to be displayed
in the message area qa.
ALL: To display all messages
AT: To display Auto Setup information and
higher
WRN: To display warning messages and
higher
OFF: To display warning messages of the
highest level only
3-6-2 Viewing the ABNORMAL <!>
Display
Pressing the CANCEL/STATUS button calls the following
ABNORMAL< ! > display, permitting you to check the
items for which the setting is not in the normal condition.
U 0 1
G A I N : O N
S H U T T : O N
U N I T : d e g
B A T T 1 2 : O F F
B A T T 2 4 : O F F
R E C : O F F
T A P E : O F F
T C : O F F
M E S S A G : A L L