Sony SRW-9000PL Operation Manual page 56

To set the subdisplay to Setup mode
Hold the PAGE button pressed for more than five
seconds to set the subdisplay to Setup mode.
Subdisplay in Setup mode
Select a page in the first line, and select ON or
OFF on the second line.
Pages that are set to OFF will not appear in the
subdisplay.
Indication
SHUTTER
RAMP
FORMAT
ND
GAIN/WHT/
5600K
GAIN L/M/H
LENS FILE
VTR STATUS
TC/TAPE REM
VOLT/FAN
CHAR MIX
ASSIGN SW1/
SW2
ASSIGN SW3/
SW4
ASSIGN SW5/
SW6
ASSIGN SW7/
SW8
ASSIGN SWN/
SWC
BRIGHT
GAMMA TABLE Gamma table selection page
To select pages with a menu operation
Use the <SUBDISPLAY 2> page of the Camera
>USER (OPERATION) menu.
For details on how to operate the Camera menu, see
"Basic Camera Menu Operations" (page 124).
56 Basic Settings with the Subdisplay
Target page
Shutter settings page
Ramp settings page
Video format selection page
Optical filter status page
Gain setting page
Gain switch values (L/M/H)
page
Lens file selection page
VTR status page
Timecode/tape remaining
page
Voltage check/Fan mode page
Character data page
Assignable buttons 1 and 2
setting page
Assignable button 3 and
switch 4 setting page
Assignable buttons 5 and 6
setting page
Assignable buttons 7 and 8
setting page
Assignable buttons N and C
setting page
Subdisplay brightness
adjustment page
<SUBDISPLAY 2> page
Move the cursor to PAGE SELECT then press the
MENU SEL/ENTER dial to display to the
<PAGE SELECT> page.
<PAGE SELECT> page
To switch between ON/OFF settings, move the
cursor to the setting you wish to change and press
the MENU SEL/ENTER dial.
Note
"RAMP" appears only when the optional HKSR-9002 is
installed.