Table of Contents
Advertisement
j Gain value
Displays the video gain value (dB) of the video
amplifier.
k Shutter
Displays the shutter setting as a shutter angle or
speed. For a shutter angle,
left.
The type of the display, angle (deg) or speed
(sec), can also be switched on the <VF
DISPLAY> page of the Camera >USER
(OPERATION) menu (default: deg).
l Audio level meters
The upper row displays the maximum levels for
odd-numbered channels. The lower row displays
the maximum levels for even-numbered
channels.
m Tape remaining
Indicates the approximate remaining tape time in
minutes.
n Iris setting
Indicates the iris setting of the lens.
With an ARRI LDS lens: I0 to I1023
With a Cooke /i lens: T00.00 to T99.99
o Self-diagnosis information
If an error occurs on an internal board or
elsewhere, "CAM?" appears here, and an error
message appears in the message area.
This indication cannot be turned off.
For the error messages, see "Warning/Error
Messages" (page 202).
p Message area
Displays the status of auto setup processing, error
messages, and so on.
For the error messages, see "Warning/Error
Messages" (page 202).
q Timecode area
Displays the same timecodes as the subdisplay.
For details, see "Checking Timecode and the
Remaining Tape Time" (page 52).
To select the basic status indications
You can use the <VF DISPLAY> page of the
Camera >USER (OPERATION) menu to select
the basic status indications that you want appear
in the viewfinder.
is displayed at the
Viewing Settings and Indications in the Viewfinder
<VF DISPLAY> page
Item
Setting
FPS
Set to ON to obtain the frame rate
indication 1.
FOCUS
Set to ON to display the focus position
indication 4.
IRIS
Set to ON to display the F value
indication qd.
ZOOM
Set to ON to display the zoom position
indication 5.
ND
Set to ON to display the optical filter
indications 8.
5600K
Set to ON to display the 5600
indication 7.
WHITE
Set to ON to display the white balance
memory indication 6.
GAIN
Set to ON to display the gain value
indication 9.
SHUTT
Set to ON to display the shutter
indication 0.
UNIT
Select the unit for the shutter
indication.
deg: Shutter angle (default)
sec: Shutter speed (sec)
BATT
Set to ON to display the battery
indication 3.
REC
Set to ON to display the recording
mode indication 2.
TAPE
Set to ON to display the tape remaining
indication qs.
TC
Set to ON to display the timecode
indication qh.
AUDIO
Set to ON to display the audio level
meters qa.
MESSAG Select the type of messages to be
displayed in the message area qg.
ALL: Display all messages
AT: Display auto setup information and
higher
WRN: Display warning messages and
higher
OFF: Display warning messages of the
highest level only
65
Advertisement
Table of Contents
