Assistant Panel (Optional) - Sony SRW-9000PL Operation Manual

k SR Motion
When SYSTEM Setup >FORMAT >SELECT
FPS in the VTR menu is set to "ON" and the
signal format is being displayed, pressing both the
FUNC and HOME buttons together displays the
FPS or FRM on the second line and the memory
level on the third line.
See Chapter 6 "SR Motion (With HKSR-9002
Installed)" (page 101) for more information about
the SR Motion function.
AP-1 Assistant Panel (Optional)
By connecting the cable to the CTRL (CAM)
connector, you can operate the unit remotely. You
can also connect the AP-1 Assistant Panel to the
unit's left-side panel. The AP-1 provides the same
functions as the switches and buttons on the unit's
right-side panel.
See "Attaching the AP-1 Assistant Panel (Optional)"
(page 39) for more information about attaching the
AP-1.
1 Connection cable
2 LOCK switch (page 17)
3 VF MENU/DISPLAY button (page 18)
4 Assignable switches 1 to 3 (page 18)
5 CANCEL/STATUS button (page 18)
6 RUN button and indicator (page 18)
7 Assignable 4/AUTO BLK BAL switch
(page 18)
8 PAGE button (page 19)
9 SET button (page 19)
q; Subdisplay (page 19)
qa MENU SEL/ENTER dial (page 19)
Note
The cursor in the subdisplay may move
unexpectedly if you disconnect or connect the
28 Locations and Functions of Parts
AP-1 cable while operating the subdisplay. If a ?
symbol is shown on
the subdisplay, register the setting before
disconnecting or connecting the cable.