Selecting The Viewfinder Output Signal; Viewing And Setting The Viewfinder Display; Viewing The Basic Status Display - Sony F65 Operation Manual

For details, see "When Color/LUT is selected"
(page 38) for SDI OUT1.
3-6-2 Selecting the Viewfinder
Output Signal
This selects the video signals for output on the VF and HD-
Y connectors.
<VF/HD-Y Source> page
Select
Selects the image for output.
The default setting is SDI-OUT2.
SDI-OUT1: Selects the image that is output on the
SDI OUT1 connector.
SDI-OUT2: Selects the image that is output on the
SDI OUT2 connector.
3-7 Viewing and Setting
the Viewfinder Display
Besides the video image, the viewfinder can display text
and messages showing the camera settings and operation
status.
The same information can be displayed on a monitor
connected to the SDI OUT connector.
Switching the image displayed in the viewfinder
The image in the viewfinder can be set to the output on the
SDI OUT1 connector or SDI OUT2 connector using the
<VF/HD-Y Source> page in the VF/SDI menu. See "3-6-
2 Selecting the Viewfinder Output Signal" (page 39).
The default setting is the image that is output on the SDI
OUT2 connector.
3-7-1 Viewing the Basic Status
Display
The following status information is displayed in the
viewfinder when you press the VF DISPLAY button.
The display status can be specified on the <Status> page in
the Display Info menu (page 54).
1 2
6
9 0 qd qa
a System format
Displays the current signal format of the camera.
b Shutter angle
Displays the shutter value as a shutter angle.
When using an electronic shutter, "E" is displayed before
the angle. When using a mechanical rotary shutter, "R" is
displayed.
c ND filter
Displays the type of ND filter currently selected.
d Sensitivity
Displays the currently set sensitivity as an EI value.

Viewing and Setting the Viewfinder Display

3 4 5
7 8
qs
39