Lamp Power / Liteloc™ Setup Window - Christie CP2210 User Manual

6.14.1 Lamp Power / LiteLOC™ Setup Window
LiteLOC™ is a power control algorithm that increases the power level to maintain lamp brightness as the lamp
ages. Tap Menu > Advanced Setup > Lamp Power/LiteLOC™ Setup.
Table 6.12 Lamp Power / LiteLOC
Control
1: Power %
2: Enable
LiteLOC™
3: Light Meter - Set Target
4: Amps, Volts, Watts, ~FL or
2
~cd/m , Hours
5: Text Region
6: Light Bar
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Downloaded from ProjectorsManual.com Manuals
1
2
3
Figure 6-18 Lamp Power / LiteLOC™ Setup Window
™
Description
The percentage of power to supply to the lamp. See 6.14.2 for the valid Lamp Power ranges
for specific lamp types.
Applies LiteLOC
Automatically enables LiteLOC
possible. The Light Meter value is an arbitrary unit of measure, not lumens or fL.
Lamp current in amperes, lamp voltage in volts, lamp power in watts, approximate Foot
Lamberts reading on the light sensor (assuming a calibration was performed), and hours on
current lamp.
The current light sensor reading in arbitrary units-of -measure and does not represent actual
lumens or fL.
The current light intensity and LiteLOC
4
Setup
™ to the current channel.
™ and maintains the current brightness level as long as
™ target .
Section 6: Projector Menus
5
LiteLOC™
6
Target
Light
Intensity
6-25