Contact Your Dealer - Christie CP2210 User Manual

Dlp digital cinema projector
Hide thumbs Also See for CP2210:
Table of Contents

Advertisement

may not be limited to a polycarbonate face shield, protective gloves, and a quilted ballistic nylon jacket or a
welder's jacket. NOTE: Christie's protective clothing recommendations are subject to change. Any local or
federal specifications take precedence over Christie recommendations.
Cool the Lamp Completely
DANGER
clothing whenever lamp door is open or while handling lamp. Ensure those within the vicinity
of the projector are also suited with protective clothing. Never attempt to access the lamp
while the lamp is ON. Wait at least 10 minutes after the lamp turns OFF before powering
down, disconnecting from AC and opening the lamp door.
1.3

Contact Your Dealer

If you encounter a problem with your Christie projector, contact your dealer. To assist with the servicing of
your projector, enter the information in the tables and keep this information with your records.
Table 1.1 Purchase Record
Dealer:
Dealer or Christie Sales/Service Contact Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date:
* The serial number can be found on the license label located on the front panel.
Table 1.2 Ethernet Settings
Default Gateway
Projector IP Address
Subnet Mask
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Downloaded from ProjectorsManual.com Manuals
Lamp may explode causing bodily harm or death. Always wear protective
Section 1: Introduction
1-3

Advertisement

Table of Contents
loading

Table of Contents