Christie CP2210 User Manual page 145

EXAMPLES:
(SNM+TSIP "xxx.xxx.xxx.xxx") Sets the Trap IP address to xxx.xxx.xxx.xxx
(SNM+TSIP "0.0.0.0") Setting the IP address to 0.0.0.0 will stop SNMP Agent from sending the traps.
(SNM+LHLT 1) Setting this flag to 1 will disable any future lamp half life traps
(SNM+LEXT 1) Setting this flag to 1 will disable any future lamp expire traps
(SNM+ENVT ?) Get the flag to see if V2 is enabled (1) or disabled (0)
(SNM+ENVT 1) Enable SNMP V2
(SNM+ENVT 0) Disable SNMP V2
Screen Orientation (SOR)
Set screen orientation. This allows for flipping the screen orientation to allow for various mounting options of the
projector including the use of mirrors and front or rear screen projection.
SUBCODE
NONE
EXAMPLES:
(SOR?L) List orientation options
(SOR?) Get the orientation status
(SOR0) Set orientation to front
Select Source Format (SRF)
elect the Source format file.
S
SUBCODE
Cxxx
NONE
EXAMPLES:
(SRF+C108 "XXX") Use file "XXX" on channel 108
(SRF+C108?) Get source file name on channel 108
(SRF?L) List all entries of source control
(SRF+RFSH 1) Refresh TI file list
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Downloaded from ProjectorsManual.com Manuals
DESCRIPTION OF USE
Select Orientation:
0 - Normal Front,
1 - Inverted Rear,
2 - Normal Rear,
3- Inverted Front
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select source format for the current channel.
Appendix A: Serial API Commands
A-19