Present Movies; Connect Sources - Christie CP2210 User Manual

Ghosting / Cross-talk
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Raise or lower the Dark Time field value.
5. Raise or lower the Output Delay field value.
Motion Artifacts
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Select Left (L1R1 L2R2) in the L/R Display Sequence list.
Disturbing Flashing in One Eye
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Select Left (L1R1 L2R2) in the L/R Display Sequence list.

4.12 Present Movies

This section provides information and procedures for using the projector to present movies. It is recommended
that you read through this section in its entirety before displaying movies for the first time. Before you display
movies for the first time, verify that the projector is properly installed, aligned, and configured. See
Installation and

4.12.1 Connect Sources

Connect a digital media storage device or cinema server to one of the 292A or 292B input ports. For a list of
standard single-link SMPTE 292M Formats, see
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Downloaded from ProjectorsManual.com Manuals
Setup.
Appendix B: Specifications.
Section 4: Adjusting the Image
2
4-13