Christie CP2210 User Manual page 149

3D Frame Rate Multiple (TFR)
Setup frame rate multiple for 3D control
SUBCODE
Cxxx
NONE
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 3) Set frame rate multiple to "4:2" on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
Get Certificates (TIG)
Gets the LD or ICP certificate.
SUBCODE
ENGC
ICPC
EXAMPLES:
(TIG+ENGC?) Gets the LD certificate
(TIG+ICPC?) Gets the ICP certificate
3D Input Reference (TIR)
Setup the Input Reference for 3D control.
SUBCODE
Cxxx
NONE
EXAMPLES:
(TDK+C101 "Use GPI (polarity=true)") set Input Reference to 'Use GPI (polarity=true)' on channel 101
(TDK+C101?) get Input Reference for channel 101
Time/Date (TMD)
Set/get the time, date and time zone.
SUBCODE
DATE
DSTA
TIME
TOFF
ZONE
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Downloaded from ProjectorsManual.com Manuals
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select 3D frame rate for the current channel.
DESCRIPTION OF USE
Retrieve LD Certificate
Retrieve ICP Certificate
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101-164.
Select input reference for the current channel.
DESCRIPTION OF USE
Get the date in the form yyyy/mm/dd. Read-only.
Set/get the daylight savings time adjust value.
Set/get the local time in the form hh:mm:ss. Ready only.
Set Time Offset in seconds (± 900 seconds). Must be powered ON. (Write-only)
Set/get the time zone
Appendix A: Serial API Commands
A-23