4 Adjusting the Image
This section provides information and procedures for adjusting the projector image.
4.1
Maximize Light Output
To ensure optimal operation and peak screen brightness, use LampLOC
you install a new lamp in the projector. When you complete the LampLOC adjustment, the lamp is centered
and is the correct distance from the illumination system. Before running LampLOC, verify that
• The lamp is on and the douser is open.
• A white test pattern is selected.
1. On the TPC, tap Menu > Advanced Setup > LampLOC
2. Tap Do Auto.
4.2
Calibrate Screen Brightness (fL)
1. On the Touch Pad Controller, tap Menu >
Administrator Setup > Foot Lamberts
Calibration.
2. Complete t he Foot Lamberts Calibration
wizard.
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Downloaded from ProjectorsManual.com Manuals
to adjust the lamp position whenever
™
Setup.
™
Figure 4-1 Footlamberts Calibration Wizard
4-1