Top Cover Camshaft Assembly Removal - Lexmark C520 Series Service Manual

Top cover camshaft assembly removal

1.
Remove top access door 24V interlock switch. See
page 4-60.
2.
Remove left cover. See
3.
Rotate lever arm (A) all the way up as if the top access door were open; hold lever arm (A) in place and
rotate camshafts (B) down to the closed postion.
4.
While still holding lever arm (A) up, remove left front mounting screw (C) and flip right lock (D) back.
5.
Continue to hold lever arm (A) up and remove right front mounting screw (E); release lever arm.
6.
Remove e-clip (F) .
7.
Slide lever arm (A) and spring (G) off shaft.
Warning: When removing right rear mounting screw, be careful not to damage or remove spring that mounts
over the screw.
8.
Remove rear mounting screws (H).
9.
Remove top cover camshaft assembly.
"Left cover removal" on page
"Top access door 24V interlock switch removal" on
4-20.
5022-xxx
4-61
Repair information