iRobot Ava 500 Administrator's Manual page 69

Ava 500 IT Administrator's Guide The Ava 500 Configuration Interface
4. Select Restarter to see the Restarter functions (Figure 33).
Figure 33. Restarter Functions
5. Click Software Restart so that the network uses the submitted change. The robot's LEDs will briefly turn off,
then change to flashing green. Once the restart process is complete they will return to their previous state.
6. Disconnect your laptop and release the stop button.
7. Put the robot back on its charging station.
8. Re-configure your laptop's network adapter to its original state.
Version 1.2 – 012415 Page 65
iRobot Proprietary