Rebooting The Ava 500 - iRobot Ava 500 Administrator's Manual

Ava 500 IT Administrator's Guide
This section is intended to help you quickly solve simple problems. The following information is included:
• Rebooting the Ava
are also included on the Ava 500 Caretaker's Poster.
• Understanding Ava 500
end of a session.
• Remote User Symptoms: Solutions to potential situations reported by a remote user.
• Local Symptoms: Solutions to situations that arise on the Ava 500.
• The Ava 500 Configuration
Configuration Interface.

Rebooting the Ava 500

Some problems in the field can be resolved by rebooting the Ava 500. Only reboot the Ava 500 when instructed to
do so by Technical Support. Always reboot the Ava 500 on its charging station.
In preparation for mapping, a location is selected for the Ava 500 charging station. If more than
one robot is installed, each robot is assigned to a specific charging station. In the event of a
problem, the Ava 500 should always be returned to its assigned charging station before rebooting.
Version 1.2 – 012415
500: Standard instructions for performing a full reboot of the system. These instructions
Availability: Details on when the Ava 500 becomes unavailable and behavior at the
Interface: Instructions on accessing and using functions in the Ava 500
Page 45
iRobot Proprietary
Rebooting the Ava 500