Table of Contents
Advertisement
Ava 500 IT Administrator's Guide
The Ava 500 Configuration
Interface
Beginning with version 1.2, a Configuration interface allows you to provide operational details to Technical
Support if needed, as well as to address the effect on the Ava 500 of some common infrastructure changes:
•
A change in the robot's network, such as a changed pre-shared key.
•
A change in the administrator password on the EX60.
You will need an Ethernet cable and either Chrome or Firefox installed on your laptop. The procedure to make
changes is:
1. Move the Ava 500 to a convenient working location.
2. Push the stop button
3. Use an Ethernet cable to connect your laptop to the access port in the Ava 500's service compartment
4. Configure your laptop's network adapter to a static IP
5. Open the configuration interface in Chrome or Firefox
6. Make the required changes
7. Release the stop button
8. Push the Ava 500 onto the charging station
9. If necessary, reboot the Ava 500
Version 1.2 – 012415
Page 56
iRobot Proprietary
The Ava 500 Configuration Interface
Advertisement
Table of Contents
