If You Are Moving - iRobot Ava 500 Administrator's Manual

Ava 500 IT Administrator's Guide
During construction, dust and debris may accumulate on the Ava 500's sensor lenses and LIDAR
lens. This can potentially interfere with the robot's operation. If the Ava 500 is to remain
operational during construction, once a week the Ava 500's caretaker should use a Swiffer® 360
to dust the sensor lenses and the LIDAR lens.

If You Are Moving

Contact Technical Support at least four weeks before the move and provide a PDF of the new site layout. iRobot
can consult with you about the best location for the charging station and how to address any operational
challenges at the site. iRobot will also schedule a time to map the new location and work with you to get the Ava
500 ready for transport.
You cannot transport the Ava 500 with its batteries installed. The batteries must be removed, and
then packed and shipped by people certified in hazardous materials handling.
Version 1.2 – 012415 Page 31
iRobot Proprietary
Site Changes After Installation