Ava 500 IT Administrator's Guide
The Configuration and Maintenance section Includes:
•
Data Communications and
System communicate along with details on wireless communications and security.
System
Configuration: Describes how information links the various components of an Ava 500 system, and
•
discusses component configuration and management.
•
Software
Upgrades: For each major component, describes how and when software is updated.
•
Site Changes After
are handled.
The Administrator
•
about robot health issues.
Data Communications and
Security
This section describes Ava 500 data communications paths, discusses WLAN network configuration
considerations, details the supported wireless authentication and encryption protocols, and reviews proxy support.
Data Communications
Figure 7 illustrates the communications paths that are part of an Ava 500 installation.
Inside the Ava 500, the Cisco EX60 is connected to the base CPU in an internal LAN configuration. The CPU
connects to the internal Cisco AP1600e access point, configured as a workgroup bridge (WGB), in an internal
Version 1.2 – 012415
Security: Discusses in more detail how the various components of an Ava 500
Installation: Describes how various changes in a site after the site has been mapped
Console: Provides instructions on how to configure users, observe sessions, and details
Figure 7. Ava 500 Communications
iRobot Proprietary
Page 17
Data Communications and Security