Table of Contents
Advertisement
Ava 500 IT Administrator's Guide
5. Click the Configuration tab. The Configuration tab lists previous configurations and allows you to set a new
configuration (Figure 30). The fields on the tab change as you make selections.
If the Ava 500 was configured in software version 1.1, the current configuration information does
not display on the Configuration tab. If you are uncertain about the current configuration, contact
Technical Support.
When you create a new configuration, keep the name as short as possible for best display in the
table of past configurations. However, the name can be up to 2046 characters, and can use
numbers and symbols.
Version 1.2 – 012415
Figure 29.The Monitoring Tab, Not Associated
Figure 30. The Configuration Tab
Page 62
iRobot Proprietary
The Ava 500 Configuration Interface
Advertisement
Table of Contents
