Connecting And Configuring Your Laptop - iRobot Ava 500 Administrator's Manual

Ava 500 IT Administrator's Guide The Ava 500 Configuration Interface

Connecting and Configuring Your Laptop

The following procedure is illustrated using Windows 7.
1. Using an Ethernet cable, connect your laptop to the access port in the Ava 500's service compartment
Figure 20).
Figure 20. Connection to the Access Port
2. Open the Network and Sharing Center on your laptop.
3. Click on Change Adapter Settings (Figure 21).
Figure 21. Network and Sharing Center
Version 1.2 – 012415 Page 57
iRobot Proprietary