Changing The Ex60 Administrative Password - iRobot Ava 500 Administrator's Manual

Ava 500 IT Administrator's Guide
10. Disconnect your laptop and release the stop button.
11. Put the robot back on its charging station.
12. Re-configure your laptop's network adapter to its original state.

Changing the EX60 Administrative Password

If you change the administrative password on the EX60 you must also change it on the Ava 500 network
configuration. Until the two passwords are in sync you will see a VoIP health warning on the Administrator
Console.
1. Select System to show the system configuration interface (Figure 32).
2. Under Cisco EX60 Settings, enter or change the Admin Password.
Do not delete the username and attempt to configure with a blank user name. You will have a
problem on reboot.
3. Click the blue Home link in the title bar to return to the Ava 500 Configuration interface main menu.
Version 1.2 – 012415
Figure 32. Ava 500 Configuration Page
Page 64
iRobot Proprietary
The Ava 500 Configuration Interface