Ava 500 IT Administrator's Guide
Accessing the Configuration Interface
Once you have configured your laptop, bring up the configuration interface by typing the following into a Chrome
or Firefox address bar:
http://172.18.0.1:82
Enter username: aware, Password: aware. The Ava 500 Configuration Menu is displayed (Figure 26).
Most of these functions, if misused, can seriously affect the operation of the Ava 500. Only
Battery, Installed Packages, and Version are reports with no effect on operation. Use only those
functions included in the following procedures, unless you are familiar with their effect or are
directed to by Technical Support.
This section describes two common procedures:
•
Reporting on or changing the robot's workgroup bridge (WGB) configuration
•
Changing the EX60 administrator password in the robot's internal network configuration
Version 1.2 – 012415
Figure 26. iRobot Ava 500 Configuration Interface
Page 60
iRobot Proprietary
The Ava 500 Configuration Interface