Maintenance And Checks - Fimap MXR Workshop Manual

9.3 Maintenance
Checks
9.3.1 Solution Tank
Check
(to perform every 50h)
The solution tank has to be clean and
intact. It has not to have cracks or any
other kind of damage. Verify, when the
tank is completely filled up, that there
are not leakage. If necessary replace the
Solution Tank.
9-70
9.3.2 Hoses
Check
(to perform every 50h)
Every single hose has to be intact and
has not to be worn out. It is extremely
important that the hoses kept the orig-
inal flexibility and they haven't suffered
any chemical reaction with the detergent
used with the machine.
proceed with the replacement of the
damaged hoses.
9.3.3 Water Valve
Check
(to perform every 50h)
It is extremely important that when
adjusted at minimum the valve blocks
completely the water flow and that the
adjustment lever is mechanically free to
move for its while stroke.
and
9.3.4
Check
The filter has to be periodically cleaned.
When it is fitted on the machine no
leakage has to be present.
cartridge has to be intact and has not to
present any anomaly.
9.3.5
Check
The solenoid valve has to block com-
pletely the solution flow when the brush
deck is not working. Viceversa it has to
grant the full flow rate when the brush
deck is working.
If necessary
Clean Water Filter
(to perform every 4h)
Solenoid Valve
(to perform every 50h)
The filter