Other Configuration Settings
TAA (Tape Application Accelerator)
■
Preset value is TAA
Options: Sync, TMK, All, or No (N)
MaxCap (StorageTek Maximum Capacity)
■
Preset value is MaxCap OFF.
Options: OFF or ON
Other Configuration Settings
The following registers are set to the conditions shown:
IP Node Name: T10000-<last 9 digits of Serial Number>
■
SNMP Alerts: All turned OFF
■
Library Locator: ACS: 0 LSM: 0 Panel: 0 Drive: 0
■
SNMP Managers: None Specified
■
Drive Statistics: All zeroed
■
Permanent Errors: All zeroed, pointers initialized.
■
Temporary Errors: All zeroed, pointers initialized.
■
C-4 StorageTek T10000 Tape Drive Operator's Guide
N.
If the drive interface type is changed, the SFileAcel, TAA, and
Note:
MaxCap parameters are reset to the factory default (Preset) value.