Table of Contents
Advertisement
The button color changes to blue when the tape drive is online.
To View the Configuration (Operator Panel)
Press the operator panel Menu button to enter the menu system:
1.
■
■
Press the Menu button until View CFG ? appears in the window display.
2.
Press the operator panel Select button (Yes) to enter view configuration submenus.
3.
The first configuration setting appears in the operator panel display window.
Press either the Menu or the Select button to step through the configuration
4.
settings.
Press either the Menu or Select button until Exit CFG ? appears in the display
5.
window.
Press the Select button (Yes) to exit the configuration submenus, or press the
6.
Menu button (No) to repeat the view configuration sequence.
Press the Menu button until Exit Menu? appears in the display window.
7.
Press either the Select button (Yes) to exit the menu system or the Menu button
8.
(No) to return to the online/offline selection menu.
To View the Configuration (VOP)
Select Retrieve from the menu bar or use the Alt+r keyboard shortcut to open the
1.
menu.
Select View Drive Data or use the Shift+v keyboard shortcut to access the View
2.
Current Drive Settings dialog box.
See
Chapter 4, "Menu System"
Note:
guidelines.
If Online appears in the tape drive's front panel display, go to Step 2.
If Offline appears, press the Select button to toggle the drive state (see
Place the Drive Online (Operator Panel)"
It is important that you view configuration settings in the
Note:
online state, because you cannot accidently change settings in this
drive state. To change settings, you must first set the drive to the
offline state (see
"To Place the Drive Offline (Operator Panel)"
page 3-12).
In the drive online state, the Select button has the same
Note:
function as the Menu button, unless you are answering a displayed
question.
The drive must be in the online state.
Note:
Menu System Tasks
for compete information and
on page 3-10).
on
Operator Tasks 3-11
"To
Advertisement
Table of Contents
