Table of Contents
Advertisement
Defaults to the last saved selection.
Contact Technical Support for any assistance.
SL Prot Y selects standard label overwrite protection.
SL Prot N deselects standard label overwrite protection.
Procedure:
Do one of the following actions:
■
–
–
Language Selection Submenu
Selects the operator panel display language: English, Espanol, Francais, Italiano, or
Deutsch.
Defaults to the last saved selection.
In the online (View) mode, the active language only appears.
In the offline mode, the operator panel window shows Language ?
Procedure:
Do one of the following actions:
■
–
–
Tape Bar Submenu
Defaults to the last saved selection.
TapeBar Y enables secondary display of the current read/write point, relative to the
beginning of data mark on the tape.
POST WRCART cannot be run with this feature enabled.
Note:
Only select SL Prot Y if label overwrite code is loaded, or if
Note:
running standard labels and want the drive to display a fatal error
(CHK 33EX) when writing a non-80-byte record for VOLSER or
HDR1.
Press Menu to bypass.
Press Select to toggle; then, press Menu to set and advance to the next
submenu.
Note:
Manufacturing ships drives with the English option
selected.
Press Menu to bypass.
Press Select until desired option appears; then, press Menu to set and advance
to the next submenu.
Manufacturing ships drives with the Tape Bar N option
Note:
selected.
View or Change Configuration Settings
Menu System 4-11
Advertisement
Table of Contents
