Defaults to the last saved selection.
Procedure:
Do one of the following actions:
1.
a.
b.
For each digit:
2.
a.
b.
If you attempt to enter a value greater than 255 in either trio, all digits flash when
the last digit is set.
Press Menu to advance to the next submenu; or, press Select to restart the change
3.
mode.
Gateway Hi Submenu
Operator panel window shows GWhaaa.bbb.
Valid entries are 000-255 for each digit trio.
Defaults to the last saved selection.
Procedure:
Do one of the following actions:
1.
a.
b.
For each digit:
2.
a.
b.
If you attempt to enter a value greater than 255 in either trio, all digits flash when
the last digit is set.
Press Menu to advance to the next submenu; or, press Select to restart the change
3.
mode.
Press Menu to bypass.
Press Select to start the change mode.
Press Select to increment the flashing digit until the desired value appears.
Press Menu to set.
If all digits flash, press either Select or Menu to clear; then,
Note:
press Select to restart the change more.
Manufacturing ships drives with a static Gateway Hi set to
Note:
either 000.000. or 255.255
Press Menu to bypass.
Press Select to start the change mode.
Press Select to increment the flashing digit until the desired value appears.
Press Menu to set.
If all digits flash, press either Select or Menu to clear; then,
Note:
press Select to restart the change more.
View or Change TCP/IP Settings
Menu System 4-19