Table of Contents
Advertisement
Cleaning Procedures and Equipment
volume of 15 CFM outside air per occupant or workstation should sufficiently
accommodate the ventilation needs of the room.
Cleaning Procedures and Equipment
Even a perfectly designed data center will require continued maintenance. Data
centers containing design flaws or compromises may require extensive efforts to
maintain conditions within desired limits. Hardware performance is an important
factor contributing to the need for a high level of cleanliness in the data center.
Operator awareness is another consideration. Maintaining a fairly high level of
cleanliness will raise the level of occupant awareness about special requirements and
restrictions while in the data center. Occupants or visitors to the data center will hold
the controlled environment in high regard and are more likely to act appropriately.
Any environment that is maintained to a fairly high level of cleanliness and is kept in a
neat and well organized fashion will also command respect from the room's
inhabitants and visitors. When potential clients visit the room they will interpret the
overall appearance of the room as a reflection of an overall commitment to excellence
and quality. An effective cleaning schedule must consist of specially designed
short-term and long-term actions. These can be summarized as follows:
Frequency
Daily Actions
Weekly Actions
Quarterly Actions
Biennial Actions
Daily Tasks
This statement of work focuses on the removal of each day's discarded trash and
rubbish from the room. In addition, daily floor vacuuming may be required in Print
Rooms or rooms with a considerable amount of operator activity.
Weekly Tasks
This statement of work focuses on the maintenance of the access floor system. During
the week, the access floor becomes soiled with dust accumulations and blemishes.
Vacuum and damp mop the entire access floor. Equip all vacuums used in the data
center, for any purpose, with High Efficiency Particulate Air (HEPA) filtration.
Inadequately filtered equipment cannot arrest smaller particles, but rather simply
agitates them, degrading the environment they were meant to improve. It is also
important that mop-heads and dust wipes are of appropriate non-shedding designs.
Cleaning solutions used within the data center must not pose a threat to the hardware.
Solutions that could potentially damage hardware include products that are:
Ammoniated
■
Chlorine-based
■
Phosphate-based
■
Bleach enriched
■
F-8 StorageTek T10000 Tape Drive Operator's Guide
Task
Rubbish removal
Access floor maintenance (vacuum and damp mop)
Hardware decontamination
Room surface decontamination
Subfloor void decontamination
Air conditioner decontamination (as necessary)
Advertisement
Table of Contents
