Exit Configuration Submenu; View Or Change Tcp/Ip Settings; Dhcp Submenu - Oracle StorageTek T10000 Operator's Manual

View or Change TCP/IP Settings

Exit Configuration Submenu

Operator panel window shows Exit CFG ?
This submenu offers the option to either repeat the change configuration submenus or
exit the configuration submenus.
Procedure:
Do one of the following actions:
■
–
–

View or Change TCP/IP Settings

Operator panel window shows either View TCP ? (online)or Chng TCP ? (offline).
Procedure:
Do one of the following actions:
■
–
–
See the DHCP Submenu section for details of TCP/IP configuration settings, and
guidelines for changing selected settings when the drive is offline.

DHCP Submenu

Operator panel window shows DHCP Y or DHCP N.
Defaults to the last saved selection.
With DHCP Y selected, a DHCP server (remote to the drive) assigns the dynamic
TCP/IP settings.
With DHCP N selected, DHCP is disabled. The drive uses Static TCP/IP settings.
Procedure:
Do one of the following actions:
■
–
4-16 StorageTek T10000 Tape Drive Operator's Guide
After you save the configuration, the drive performs an IPL.
Press Menu (No) to loop back to the Interface Select Submenu.
Press Select (Yes) to exit and advance to the TCP/IP Configuration Menu.
Make sure the host has varied the drive offline before
Note:
setting the drive offline.
Press Menu (No) to bypass.
Press Select (Yes) to enter the TCP/IP submenus.
If bypassed, the display advances to the Firmware Release
Note:
Level menu (online) or the Drive Operations menu (offline).
Manufacturing ships all drives with the DHCP N option
Note:
selected.
Press Menu to bypass.