Click Commit at the bottom of the dialog box.
5.
See
Figure 3–5 Turn DPKM On
To Turn DPKM Off
Set the drive offline.
1.
Select Drive Data from the Configure menu.
2.
Select Encrypt from the Configure Drive Parameters dialog box.
3.
Select the Yes option for the Turn encryption off parameter.
4.
Click Commit at the bottom of the dialog box.
5.
A check mark appears in the Update box adjacent to the
Note:
parameter.
The drive performs an initial program load (IPL).
Note:
"Data Path Key Management"
A check mark appears in the Update box adjacent to the
Note:
parameter.
The drive performs an initial program load (IPL).
Note:
Data Path Key Management Procedures
on page 1-9 for additional information.
Operator Tasks 3-17