Table of Contents
Advertisement
View or Change TCP/IP Settings
For each digit:
2.
a.
b.
If you attempt to enter a value greater than 255 in either trio, all digits flash when
the last digit is set.
Press Menu to advance to the next submenu; or, press Select to restart the change
3.
mode.
Net Mask Hi Submenu
Operator panel window shows NMhaaa.bbb.
Valid entries are 000-255 for each digit trio.
Defaults to the last saved selection.
Procedure:
Do one of the following actions:
1.
a.
b.
For each digit:
2.
a.
b.
If you attempt to enter a value greater than 255 in either trio, all digits flash when
the last digit is set.
Press Menu to advance to the next submenu; or, press Select to restart the change
3.
mode.
Net Mask Lo Submenu
Operator panel window shows NMlccc.ddd.
Valid entries are 000-255 for each digit trio.
4-18 StorageTek T10000 Tape Drive Operator's Guide
Press Select to increment the flashing digit until the desired value appears.
Press Menu to set.
If all digits flash, press either Select or Menu to clear; then,
Note:
press Select to restart the change more.
Note:
Manufacturing ships all drives with static Net Mask Hi set
to 255.255.
Press Menu to bypass.
Press Select to start the change mode.
Press Select to increment the flashing digit until the desired value appears.
Press Menu to set.
If all digits flash, press either Select or Menu to clear; then,
Note:
press Select to restart the change more.
Manufacturing ships all drives with static Net Mask Lo set
Note:
to 255.000.
Advertisement
Table of Contents
