View or Change Configuration Settings
TapeBar N disables the option.
Procedure:
Do one of the following actions:
■
–
–
Library Address Submenu
The operator panel window shows Lib Adr xy.
For SL8500, SL3000, and L180/L700/L1400 libraries; use the factory preset (FF)
■
with T10000 tape drives.
In 9310 libraries (T10000A only), looking at the back of the drives, the address
■
sequence in the drive cabinet is:
Left column from top: 00 through 09.
Right column from top: 0A through 13.
Defaults to the last saved selection.
Procedure:
Do one of the following actions:
1.
a.
b.
Press Select to increment the x digit until the desired value appears, then press
2.
Menu to set.
Repeat step 2 for the y digit.
3.
Press Menu to advance to the next submenu; or, press Select to restart the change
4.
mode.
StorageTek File Sync Accelerator Submenu
SFileAcelY selects file sync accelerator. enables applications to reduce or eliminate
back hitches caused by writing a tape mark or other sync operations.
SFileAcelN deselects file sync accelerator.
Defaults to the last saved selection.
Procedure:
Do one of the following actions:
■
–
4-12 StorageTek T10000 Tape Drive Operator's Guide
Press Menu to bypass.
Press Select to toggle; then, press Menu to set and advance to the next
submenu.
Manufacturing ships drives with Lib Adr FF selected.
Note:
Press Menu to bypass.
Press Select to start the change mode.
Manufacturing ships drives with SFileAcelY selected.
Note:
Press Menu to bypass.