D Messages And Translated Messages; Messages; Operator Panel Display Messages - Oracle StorageTek T10000 Operator's Manual

Hide thumbs Also See for StorageTek T10000:
Table of Contents

Advertisement

This appendix summarizes the T10000 tape drive operator-panel indicator lights and
display messages. Where applicable, this appendix recommends operator actions.

Messages

Table D–1
Table D–1

Operator Panel Display Messages

Display
Meaning
* (asterisk)
The tape drive is online but a cartridge tape is
not loaded.
IPL diagnostics are running.
ASIA Diags
During boot, a section of memory was found
Bank n Bad
bad.
The IPL failed.
Boot Fail
A sequence of switches accessed an engineering
BT Monitor
area.
IPL diagnostics are running.
CC Diags
Chk xxxx, xxxx is an
An operational failure occurred; the tape drive
FSC
automatically performs an IPL.
Cleaning (*Cleaning*)
A cleaning cartridge is in the tape drive and is
now cleaning.
cnhndnsn (Hardware
The tape drive firmware level is insufficient to
revision level
control the tape drive hardware.
supported by the
firmware in this drive)
The tape drive cannot write code onto the data
CodCrFail1
cartridge tape, or the tape drive cannot position
the data cartridge tape.
The tape drive cannot read code from the data
CodCrFail2
cartridge tape.
The firmware in the tape drive is being updated
CodeUpDate
from the host; the operator panel switches are
locked.
The tape drive cannot read the data cartridge
CodUpFail1
tape, or the tape drive cannot position the data
cartridge tape.
The EEPROM failed.
CodUpFail2
Messages and Translated Messages
D
lists operator panel display messages, meanings, and recommended actions.
Recommended Action
Load a cartridge tape as required.
None
Perform a drive IPL. If the problem persists, contact
authorized service personnel.
Perform a drive IPL again. If the problem persists,
contact authorized service personnel.
Perform a drive IPL.
None
Wait for the IPL to complete and retry the operation
(see
Table
D–2). If the problem persists, contact
authorized service personnel.
None
Contact authorized service personnel.
Ensure that the tape is write-enabled, or try another
cartridge tape.
Retry the operation, or try another cartridge tape. If
the problem persists, contact authorized service
personnel.
None
Try another cartridge tape.
Contact authorized service personnel.
Messages and Translated Messages D-1
D

Advertisement

Table of Contents
loading

Table of Contents