Operator panel assembly removal
See
"7 inch LCD touch screen" on page 7-3
Remove the top access cover assembly. See
1.
Place the top access assembly on a soft lint-free cloth with the touchscreen facing down.
2.
3.
Remove the six smaller screws (A) securing the position guide cover.
Remove the five larger screws (B) and the two smaller screws on the side (C), then remove the position
4.
guide cover to access the cables.
B
C
for the part number.
"Top access cover assembly removal" on page
A
B
7526
4-40.
B
C
Repair information
4-27
Previous
Next
Go Back