D The Setup Level - Image Access WideTek 36C Manual

D The Setup Level
The setup level is divided in three access levels. The access levels Poweruser and
Admin are password protected.
The User access level allows showing certain information about the system like power up
time, remaining lamp life time or firmware version.
Furthermore the access level User allows setting some basic parameters.
Start your browser and enter the IP address of the scanner to get access to the scanner.
The Scan2Net® main menu will open (see Picture 67).
The Login Screen
On the start screen, click the button Setup Device .
The next screen shows the login levels User , Poweruser and Admin .
Note: The login levels Poweruser and Admin are password protected. Only trained
technicians should use these levels.
Manual
Picture 72: Login screen
Page 63