Table of Contents
Advertisement
PROGRAM LOAD FRAME: DETAIL-2
6.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2
The operating mode can be reset using the PROGRAM LOAD FRAME: DETAIL-2. This
selects the appropriate firmware for running BS2000 or VM2000.
The following are specified in the example below:
VM2000 operating mode
executing IPL after reloading the firmware
Conditions
You must be in the PROGRAM LOAD FRAME: DETAIL-1 screen.
Invoke PROGRAM LOAD FRAME: DETAIL-2 screen
Press the
Ê
The PROGRAM LOAD FRAME: DETAIL-2 screen appears:
-VM MODE-
>*1 NATIVE
RA
Figure 52: PROGRAM LOAD FRAME: DETAIL-2 screen
VM MODE ==>
IPL EXECUTION ==>
92
key.
P9
----- PROGRAM LOAD FRAME: DETAIL-2 -----
==> 2
*2 AVM/EX
CL-0
-IPL EXECUTION-
==> 1
>*1 ENABLE
*2 DISABLE
*ENTER
*PF3
*PF9
CPU-0 CHP-0
RUN
M
Enter
for VM2000 operation.
2
Enter
for executing IPL.
1
Standard processing in SVP mode
E40L01G
EXECUTE
GO TO BASIC FRAME
GO TO DETAIL-1
M
FLAG CODE = D90557 W 00000V00
[]-[]00
U41161-J-Z126-1-76
Advertisement
Table of Contents
