CHAPTER 3 REMCS Service Start Procedure
3.2 REMCS Center Registration
1. Click the [Next] button.
The window for selecting the REMCS Center to connect to appears.
3.2.2 Setting the connection configuration
Select the REMCS Center to connect to in the window shown in
window.
The REMCS Center you connect to differs according to the installation country. The initial value for Japan is
usually [OSC]. Thus, simply confirm the value in this window.
If you have already confirmed the value, this window does not appear.
FIGURE 3.2 [Customer Information Registration Instructions] window
FIGURE 3.3 [Selecting REMCS Center]
9
CA92344-0542-02