Programming Unit - Viessmann VITOTRONIC 200 Operating Instructions Manual

Opening the control unit
The heat pump control unit may look different depend-
ing on the type of heat pump.
Control unit at the front of the heat pump
14°C
Fig. 1
Control unit on top of the heat pump
BA
Fig. 2
Top part of control unit with programming unit
A
Button for changing the angle
B

Programming unit

You can change all heat pump control unit settings
centrally at the programming unit.
If remote controls are installed in your rooms, you can
also adjust the settings at these remote controls.
21°C
Control unit mounted on the wall
Fig. 3
Note
Brief operating instructions can be found on the back
of the flap. To open, pull the top edge of the flap for-
ward.
Remote control operating instructions
About the controls
9