Comfort Function "Intensive Operation - Viessmann VITOTRONIC 200 Operating Instructions Manual

Ventilation
Time program
(cont.)
Extended menu:
1.
2. "Ventilation"
3. "Time prog ventilation"
4. Set the required time phases and operating status.
Procedure for setting a time program, see page 15.
Note
Between the selected time phases: Domestic ventila-
tion with minimum air flow rate (
Operating status for ventilation
2
■ "Reduced" ( )
Reduced air flow rate (approx. 70 % of the nominal
air flow rate, see operating status "Standard").

Comfort function "Intensive operation"

Setting "Intensive operation" for ventilation
Extended menu
1.
2. "Ventilation"
3. "Intensive operation"
Domestic ventilation with maximum air flow rate (
Ending "Intensive operation"
Automatically after 2 hours. This duration can be
■
adjusted by your local heating contractor.
or
Set "Intensive operation" to "OFF".
■
Energy saving function "Economy mode"
Setting "Economy mode" for ventilation
Extended menu
1.
2. "Ventilation"
3. "Economy mode"
Domestic ventilation with minimum air flow rate (
34
1 ).
4 ).
1
).
"Standard" ( 3 )
■
Standard air flow rate (nominal air flow rate).
If a humidity and/or CO
home, then the air flow rate will be adjusted accord-
ing to the humidity and/or CO
4
■ "Intensive" ( )
Maximum air flow rate (approx. 125 % of the nominal
air flow rate, see operating status "Standard").
Note
The air flow rates for "Reduced", "Standard" and
"Intensive" are set by your heating contractor.
Display in the standard menu
4
4
21 °C
14 °C
Flow temperature
Fig. 25
Note
If "Intensive operation" ends automatically, then the
operating program that was active prior to "Intensive
operation" will be continued.
Display in the standard menu
1
1
21 °C
14 °C
Flow temperature
Fig. 26
sensor is installed in your
2
concentration.
2
HC1
40 °C
HC1
40 °C