Heating System With Elec - Viessmann VITOTRONIC 200 Operating Instructions Manual

Heating system with electric booster heater
Further information can be found in chapter
"Terminology" in the appendix.
Enabling or blocking the electric booster heater for central heating
Factory setting: Locked
Enabling or blocking electric booster heater for DHW heating
Factory setting: Enabled
Setting the time program for the electric booster heater
Factory setting: One time phase from 00:00 to 24:00 h
for every day of the week with the operating status
"Stage 3".
Extended menu:
1.
2. "System"
3. "Time prog elec heater"
4. Set the required time phases and operating status.
Procedure for setting a time program, see page 15.
Note
Outside the set time phases the electric booster heater
is blocked.
Operating status for the electric booster heater
"Stage 1":
■
Operation with low output.
"Stage 2":
■
Operation with average output.
"Stage 3":
■
Operation with maximum output.
Heating system with electric booster heater
Note
Constant operation of an electric booster heater results
in high electricity consumption.
Extended menu
1.
2. "System"
3. "Electric heating"
Extended menu
1.
2. "DHW"
3. "DHW with electr.heating"
29