Setting The Display Contrast - Viessmann VITOTRONIC 200 Operating Instructions Manual

Setting the display contrast

Extended menu
1.
2. "Settings"
Setting the display brightness
If you would like the texts in the menu to be more
clearly legible, change the brightness for "Control".
You can also alter the screen saver brightness.
Extended menu
1.
2. "Settings"
Setting names for heating/cooling circuits
You can name all heating/cooling circuits individually.
The abbreviations "HC1", "HC2", "HC3" and "SKK"
are retained.
Advanced menu
1.
2. "Settings"
3. "Name for heating circuit"
4. "Heating circuit 1", "Heating circuit 2", "Heating
circuit 3" or "Cooling circuit SKK"
5. "Change?"
6. You can select the required symbol with / .
7. / takes you to the next character.
8. Press OK to accept all entered characters at once
and simultaneously exit this menu.
Note
With "Reset?" the term entered will be deleted
again.
3. "Contrast"
4. Set the required contrast.
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
Example:
Name for "Heating circuit 2": Apartment
Heating circuit 2
g
f
Heating circuit 1 e
d
c
Change with
Fig. 30
Heating circuit 2
Apartment
Adopted
Fig. 31
The menu shows "Apartment" for "Heating circuit 2".
Apartment
Apartment
Party mode
Economy mode
Set room temperature
Set red. room temp
Select with
Fig. 32
Further adjustments
HC2
(
HC2
HC2
Ù Ú
22 °C
ß
(
37