Starting Ventilation - Viessmann VITOTRONIC 200 Operating Instructions Manual

Ventilation

Starting ventilation

Further information can be found in chapter
"Terminology" in the appendix.
The ventilation unit is switched on by your heating con-
tractor during commissioning (for the position of the
ON/OFF switch, see chapter "Filter change"
page 51, for setting the operating program for venti-
lation, see page 32).
Note
In order for humidity to be removed from rooms, the
ventilation unit must always be operated with at least
the lowest ventilation stage (
Stopping ventilation
!
Please note
If the ventilation unit is switched off permanently,
there is a high risk of moisture damage to the
building.
Activating "Standby mode"
Extended menu
1.
2. "Ventilation"
3. "Operating program"
4. "Standby mode"
No ventilation. For example, if you wish to air your
■
home by opening windows.
In conjunction with a ventilation heating circuit:
■
No supply air heating via heating circuit HC1.
Display in the standard menu
0
0
21 °C
14 °C
Flow temperature
Fig. 24
Stopping ventilation to change filters
Switch OFF the ON/OFF switch on the ventilation unit
( ), see page 51.
Operating program
Further information can be found in chapter
"Terminology" in the appendix.
32
1 ).
HC1
40 °C
Display in the standard menu
3
3
21 °C
14 °C
Flow temperature
Fig. 35 Example for ventilation in the operating pro-
gram "Ventilation program" operating status
"Standard"
Ending "Standby mode"
Select a different operating program, or alternatively a
comfort or energy saving function.
HC1
40 °C