Ending "Economy Mode - Viessmann VITOTRONIC 200 Operating Instructions Manual

Energy saving function "Economy mode"

Ending "Economy mode"

Automatically on changeover to operation with mini-
■
1
mum air flow rate (
program. That is, between the selected time phases.
or
Set "Economy mode" to "OFF".
■
Energy saving function "Holiday program"
Setting "Holiday program" for ventilation, heating/cooling
Note
The holiday program applies to both domestic ventila-
tion and central heating/central cooling in all heating/
cooling circuits (see page 24).
The holiday program starts at 00:00 h on the day fol-
lowing your departure and ends at 00:00 h on the day
of your return. This means that on the departure and
return dates, the time program specified for those days
is active (see page 33).
Extended menu:
1.
2. "Ventilation"
3. "Holiday program"
4. Set the required leaving and return dates.
Holiday program
Leaving date:
Thursday
Return date:
Friday
Select with
Fig. 27
Cancelling or deleting the "Holiday program"
Advanced menu:
1.
2. "Ventilation"
3. "Holiday program"
4. "Delete program"
) in accordance with the time
02/02/2012
03/02/2012
(
(cont.)
The holiday program has the following effect:
Domestic ventilation with minimum air flow rate
■
( 1 ).
Central heating/central cooling and DHW heating,
■
see page 24.
Display in the standard menu
1
1
21 °C
14 °C
Holiday program
Flow temperature
Fig. 28
Display in the extended menu
In the extended menu, you can call up the set holiday
program under "Information" (see page 40).
Ventilation
HC1
40 °C
35