Dhw Heating Outside The Time Program - Viessmann VITOTRONIC 200 Operating Instructions Manual

DHW heating
Time program
(cont.)
Operating status for the DHW circulation pump
"5/25 cycls"
■
The DHW circulation pump starts twice per hour for
5 min (25 min pause).
"5/10 cycls"
■
The DHW circulation pump starts four times per hour
for 5 min (10 min pause).
"ON"
■
The DHW circulation pump runs constantly.

DHW heating outside the time program

Activating "1x DHW heating"
DHW is heated to the "Set DHW temperature 2" (see
page 26).
Note
One of the following operating programs must be set
for at least one heating/cooling circuit in your system:
"Heating and DHW"
■
"Heating/cooling and DHW"
■
"Cooling and DHW"
■
"Only DHW"
■
Stopping DHW heating
You neither want to heat DHW nor heat/cool your
rooms
For the priority heating/cooling circuit
Standard menu
1. / for the operating program "Standby mode" (frost
protection).
2. OK to confirm.
For all heating/cooling circuits
Advanced menu
1.
2. "Heating" or "Heating/cooling"
3. If necessary, press / for the required heating/cool-
ing circuit.
4. "Operating program"
5. "Standby mode" (frost protection)
28
Extended menu
1.
2. "DHW"
3. "1x DHW heating"
Note
This function terminates automatically as soon as "Set
DHW temperature 2" has been reached.
You do not want to heat DHW, but do want central
heating
—
Advanced menu
1.
2. "Heating" or "Heating/cooling"
3. If necessary, press / for the required heating/cool-
ing circuit.
4. "Operating program"
5. Subject to the selected heating/cooling circuit:
For example "Heating and DHW".
6. until the menu is displayed.
7. "DHW"
8. "Set DHW temperature"
9. Set 10 °C.