Central heating/central cooling
Room temperature
Further information can be found in chapter
"Terminology" in the appendix.
Setting the standard room temperature for heating/cooling
Factory setting: 20 °C
For the priority heating/cooling circuit
Standard menu
1. / for the required value.
2. OK to confirm.
For all heating/cooling circuits
Advanced menu
1.
2. "Heating" or "Heating/cooling"
3. If necessary, press / for the required heating/cool-
ing circuit.
Setting the reduced room temperature for heating/cooling
Factory setting: 16 °C
Note
No set reduced room temperature can be specified for
a separate cooling circuit.
Advanced menu
1.
2. "Heating" or "Heating/cooling"
Operating program
Further information can be found in chapter
"Terminology" in the appendix.
Setting the operating program for heating/cooling
For the preferred heating/cooling circuit
Standard menu
1. / for the operating program:
For example "Heating and DHW".
For further possible operating programs, see
page 14.
2. OK to confirm.
For all heating/cooling circuits
Extended menu
1.
2. "Heating" or "Heating/cooling"
20
4. "Set room temperature"
5. Set the required value.
Note
Central heating to this temperature:
■
Active in the time program in operating status
"Standard" (see page 21).
In conjunction with a ventilation unit:
■
Set the room temperature for ventilation up to 4 °C
lower than the room temperature for heating/cooling.
This will ensure that the bypass functions correctly.
3. If necessary, press / for the required heating/cool-
ing circuit.
4. "Set red. room temp"
5. Set the required value.
Central heating to this temperature:
Active in the time program in operating status
■
"Reduced" (see page 21).
In the holiday program (see page 24).
■
3. If necessary, / for the required heating/cooling cir-
cuit.
4. "Operating program"
5. For example "Heating and DHW".
For further possible operating programs, see
page 14.