Network Configuration - Doremi IMS1000 Installation And User Manual

9

Network Configuration

9.1 Default Network Configuration
Ethernet port (Eth0) is set to DHCP by default. All IMS1000 boards are shipped from the factory
with the following default IP address for Eth1:

IP: 192.168.100.50

SM: 255.255.255.0

GW: 192.168.100.1
9.2 Changing the IP Address
To change the IP address of the server, go to the Administration Tab → Control Panel →
Networking Configuration and then follow the steps below (Figure 95):
Save
Button
Revert
Button
● The Networking Configuration window will appear. You will need to populate the
following fields:
○ Hostname
○ Properties of both eth0 & eth1:
IMS.OM.002949.DRM
Figure 95: Networking Configuration Window
■ Note: It is a good idea to input the circuit location/screen number in here.
For example, "DoremiScreen-1," as it will be easier to identify in the logs.
■ IP Address
● Note: Do not put leading zeroes (0) in front of any numbers. For
example, do not input 192.168.100.050.
■ Netmask
■ Gateway
Page 86 of 310
Doremi Labs
Version 1.4