Restoring The System To A Previous Backup - Doremi IMS1000 Installation And User Manual

Restore
Backup tab
Last
Backup
Performed

Clicking on the backup file will display details about the backup on the right-hand side
(Figure 190).
12.17.2
This section applies to units that have had any storage component changed. Every time a
storage component has changed, the user will receive a message asking to restore the
configuration files (Figure 191):

Yes: The user can choose to restore now by clicking on Yes. This will restore the
configuration files on the RAID to the new SSD flash drive.

No: The user can choose not to restore now by clicking on No. This will generate a
backup file based on the current configuration on the SSD flash and place it on the
RAID.
Note: If you select No by mistake, you can manually restore the latest configuration from the
second most recent record.

Ignore: The user can choose to ignore the message for now by clicking on Ignore.
This will perform no restore or backup processes.
IMS.OM.002949.DRM
Figure 190: Home Page

Restoring the System to a Previous Backup

Page 166 of 310
Doremi Labs
Backup
Info
Version 1.4