Marriage - Doremi IMS1000 Installation And User Manual

6.9

Marriage

Once the projector and board have finished booting up, the lights on the side of the projector will
be red and green, indicating that the board and the projector are not married. The touch panel
controller attached to the projector will show a second error window, indicating that the marriage
has not occurred (Figure 83). Press the Acknowledge button.

Go to Menu → Service Setup → IMB Marriage (Figure 84).

The marriage wizard, on the touch panel controller, will then guide you through the steps
necessary to complete the marriage. Click the Next button to begin (Figure 85).
IMS.OM.002949.DRM
Figure 83: Error Window
Figure 84: IMB Marriage
Page 76 of 310
Doremi Labs
Acknowledge
Button
IMB
Marriage
Version 1.4